The file ^1 cannot be enabled because it is known to conflict with Conflict Catcher.
Warning!
An error occurred trying to move at least one file, including ^.
Warning!
That startup key is either reserved, or already assigned to another set.
Warning!
To perform a Conflict Test, you must select at least one file.
The active files arenΓÇÖt responsible for the problem youΓÇÖre having. However, the culprit could be among the files you locked on at the beginning of this conflict test.
The active files arenΓÇÖt responsible for the problem youΓÇÖre having. Check your Memory control panel; Virtual Memory and 32-Bit Addressing may conflict with some older programs.
Your problem did not appear with all of the files enabled.
Either the problem is intermittent, a question was answered incorrectly, or there is no problem.
Warning!
You cannot change the lock of a file that is the intersection between two group links.
Warning!
The file ΓÇ£^1ΓÇ¥ cannot be added because it is either required or incompatible with your system.
Warning!
The file ΓÇ£^1ΓÇ¥ cannot be enabled because it would cause an incompatible file that is locked on to be disabled.
Warning!
A link with the name ΓÇ£^1ΓÇ¥ already exists. Please select another name.
To make the changes you have requested, Conflict Catcher has to restart the computer rather than continue the startup.
Conflict Catcher will now restart the computer.
Warning!
Please do not move Conflict Catcher's preference file while the control panel is open. To erase the file, please close Conflict Catcher first.
You cannot lock on all the files.
If this happened, the conflict test would be unnecessary.
Warning!
You must enter a name for the link.
Warning!
You need to select a printer before you can print.
Warning!
This saved Conflict Test is no longer valid because your list of files has changed.
Reordering the problem files solved the problem.
Conflict Catcher has automatically created a forced order link to enforce this behavior.
The serial number you entered is not valid.
Please make sure you entered the correct number. It can be located on Conflict CatcherΓÇÖs CD case.
Warning!
Conflict Catcher was unable to move ΓÇ£^1ΓÇ¥ to the Trash.
You are displaying Apple Menu Items and/or Fonts. You should be aware that throughout this test these items will disappear and reappear.
If you need any of these items to remain on during the test, you should lock them on.
Warning!
The set ΓÇ£^1ΓÇ¥ already uses that startup key. Please select a different one.
Warning!
The file ΓÇ£^1ΓÇ¥ appears to be damaged. Because it is already disabled, it should not be causing you any problems.
Warning!
You cannot duplicate a set and rename it to the same name as the original set.
Warning!
ΓÇ£^1ΓÇ¥ is the default set. To choose a different set, open Conflict Catcher by pressing the space bar during startup.
Warning!
The set ΓÇ£^1ΓÇ¥ already uses that PowerBook activation. Please select a different one.
Scan complete.
Some problems were found by scanning your files for damage.
You should be aware that the link ΓÇ£^1ΓÇ¥ contains files that are contained in other Grouped links. This may affect the behavior of your other links.
Warning!
Your System file appears to be damaged. You should perform a clean System install as described in Conflict Catcher's manual.
Warning!
The set ΓÇ£^1ΓÇ¥ is locked. Any changes you make to the status of the files will be in effect only until you change sets (or use the Revert command).
Warning!
This folder description cannot be used because the application has not been selected.
Warning!
This folder description cannot be used because the description has not been specified.
Warning!
Conflict Catcher cannot communicate with browsers or e-mail applications during startup. These services are only available when the Finder is running.
Warning!
Conflict Catcher was unable to locate a web browser on your computer. Please select one from the Internet Preferences to use this feature.
Warning!
An error occurred trying to launch the browser ΓÇ£^1ΓÇ¥. There may not be enough memory available.
Warning!
This folder description cannot be used because the application or folder is already being managed.
Warning!
This folder description cannot be used because the abbreviation has not been specified.
Warning!
This folder description cannot be used because the folder has not been specified.
Scan complete.
No problems were found by scanning your files for damage.
Warning!
This file type cannot be used because it is already being managed for this folder.
Warning!
This file type cannot be used because it is a reserved file type.
Warning!
The file ^1 cannot be enabled because it is known to conflict with your system.
Warning!
The file ^1 cannot be disabled because your system requires it to startup.
Warning!
The password you just entered does not match the selected password.
The serial number you entered is not valid. Please make sure you entered the correct number. It can be located on Conflict CatcherΓÇÖs CD case.
If you do not have a serial number, you can click 7-Day Demo to try out Conflict Catcher.
Note:
The desktop databases will be rebuilt when you restart your computer.
Warning!
You cannot create any sets or links with a dash as the first character.
Warning!
Conflict Catcher is improperly installed. The file ΓÇ£Conflict ExtensionΓäóΓÇ¥ is missing from the Extensions folder.
Please reinstall Conflict Catcher.
The file ΓÇ£^1ΓÇ¥ was successfully repaired.
Conflict Catcher was unable to repair the file ΓÇ£^1ΓÇ¥.
In order to enable the ΓÇ£^1ΓÇ¥ folder, you must first select its application.
Warning!
The file ^1 cannot be enabled because a newer version is already built into your system.
Conflict Catcher can only perform a Conflict Test when you are experiencing a problem.
Conflict Tests are not preventive medicine. Use them to find out what files are causing a specific problem you are experiencing.
The Get Info comments have been restored on the disks where the Desktop was rebuilt, and the old desktop databases have been deleted from the trash.
Warning!
The System Software selected is newer than that on the startup disk.
Conflict Catcher can merge only older System Software into a newer System Folder.
Warning!
Conflict Catcher could not find both the System and Finder files in the folder you selected.
You need to select a valid System Folder to merge with the startup diskΓÇÖs System.
Warning!
While in a Conflict Test, you cannot replace the currently active set.
Warning!
You selected the current System Folder.
Conflict Catcher cannot merge a System Folder with itself.
Warning!
The file ΓÇ£^1ΓÇ¥ appears to be damaged, and it cannot be repaired.
Warning!
An error ΓÇ£^1ΓÇ¥ occurred while merging systems. The two System Folders have been left untouched.
The Clean-Install System Merge has been successfully canceled.
The two System Folders have been left untouched.
Warning!
You must select a folder to manage that is in the same folder as the owning application or starting folder.
The Clean-Install System Merge was successful.
Any files that were replaced in the current System Folder were placed in the Trash. The following report contains the results of the merge.
Warning!
You cannot add a file with an empty name.
Conflict Catcher successfully reset the information about files that were ignored for Startup Crashes.
The old desktop databases have been deleted from the trash.
Conflict Catcher cannot merge these System Folders.
You need ^1 of free space on the current disk to copy the files for the merge, or you can change the options to perform the merge with Move instead Copy.
Warning!
The link ^1 cannot be toggled because it contains at least one file that cannot be toggled.
Warning!
You have completed a Clean-Install System Merge. You should restart the computer at this time.
Warning!
You have set the System search depth to ΓÇ£^1ΓÇ¥. Any setting greater than 1 may cause Conflict Catcher to take an abnormally long time to open.
